Multi2000 Pocket
Maker:M2M
Co-developed by M2M and EADS Innovation Works (8×32 version), Multi2000 Pocket is a highly portable, lightweight multiplex phased array system which is now available in a 8×32 (pulsers × channels) and a 16×64 configuration. The Multi2000 software is based on the CIVA software package for ultrasound propagation simulation developed by the French atomic energy research institute CEA. It performs calculation of the delay laws, controls the data acquisition, and displays in real-time the measurement results.
Multi2000-Pocket Characteristics
Model 8×32 | Model 16×64 | |
Hardware configuration | ||
# of (pulsers× channels) | 8 x 32 | 16 x 64 |
Processors | FPGA on CPU board | |
Data acquisition | ||
Gates | Hardware and software gates | |
Synchronization | Synchronization of gates available | |
Trigger | On event (threshold, echo, …) or user-specific (time, encoder, …) | |
Waveform | Acquisition of individual waveforms and/or summed data | |
Display | A-, B-, C-Scan | |
Data format | Parameters: XML; Data: binary | |
Data flow | Up to 30 MB/s | |
Phased Array Control | ||
Focusing | Customized focusing, electronic scanning, sectorial scanning | |
Inspection modes | Pulse-echo and transmit-receive | |
Pulser | ||
Pulse shape | Neg. rectangular pulse | |
Voltage | 10 … 80 V in 1 V steps | |
Pulse width | 30 … 625 ns in steps of 2.5 ns | |
Repetition rate | Up to 2 kHz on USB power; Up to 10 kHz with external power | Up to 30 kHz with external power |
Receiver | ||
Bandwidth | 0.8 … 15 MHz | |
Adjustable gain | 0 … 80 dB on each channel | |
Analog DAC | 50 dB (max. 40 dB/µs) | |
Crosstalk btw. 2 channels | > 50 dB gain | |
Input signal | Max. 0.8 Vp-p | |
Digitizer | ||
Hardware | 8 bits, FIR filter | 10 bits, FIR filter |
Sampling rate | 6.6 … 100 MHz | |
Global delay | 0 … 1.6 ms in steps of 10 ns | |
Delay laws | 0 … 20 µs in steps of 2.5 ns in transmission and reception | 0 … 300 µs in steps of 2.5 ns in transmission and reception |
Digitizing depth | 4,000 samples | Up 50,000 samples (max. 8,000 samples per elementary channel) |
External connection | ||
Data interface | USB 2 | |
Ph/A probe connector | 1 × FRB (Hypertronix) | |
Lemo connector | n/a | 2 |
TTL connectors | 1 input | 1 input |
Encoder connector | 4 channels | 3 channels |
Power supply | From USB bus or external power supply | From USB bus or internal battery or external power supply |
Others | ||
Dimensions | 20 × 11 × 6 cm | 22 × 15 × 7 cm |
Weight | 0.62 kg | 1.3 kg |